The RDP-3 Series Direct Burial Pump Vault is for medium to large size fountains where a concrete pumping station is not practical and an interior mechanical space is not available. All units are factory assembled and function tested prior to shipment to the job site. The RDP-3 Series consists of a 6′-4 1/2″ x 5′-10″ x 8′-0″ deep heavy duty FRP vault with a white gel-coat interior and a brown gel-coat exterior and a 36″ sq. hatch opening with fiberglass reinforced plastic lid, a stainless steel piano hinge attachment, and lock hardware (LOCK BY INSTALLER). It is furnished with a display pump (per project requirement) with baslet strainer, an RCCF-100; 100 sq. ft. cartridge filter unit, a RWSP-050 1/2 HP filter pump, as well as all internally required valves, pipe and fitting (Schedule 80 PVC). The unit also features a 549 CFM fan-forced ventilation system, a RMS-075-NS; 3/4″ fill manifold assembly, an RSX-33-F; 1/3 HP sump pump, an interior work light, an access ladder, an RPCP/RLCP; U.L. 508 listed control panel in a Nema 4 enclosure, containing a main disconnect, motor starter(s), 7 day/24 hour timeclock(s), H.O.A. switches; plus lighting contactor(s), LED power supplies (as required), G.F.C.I. breaker(s), and water level/low level cutoff control circuit. Please refer to the cut sheet for power requirements, available models, pump curves, additional information. Notes: Display pump specified based on hydraulic requirements for feature. Custom fabricated per project requirements. Long lead times apply. Options include: Diamond Plate Vault Hatch, Tileset Hatch, and Vault Hatch Extension. Documentation & Downloads 7.205 RDP-3 Series Direct Burial Pump Vault Cad File DWG | 445 KB 7.205 RDP-3 Series Direct Burial Pump Vault Cut Sheet PDF | 265 KB
