The RDP-250 Series Direct Burial Pump Vault consists of a 4′-0″ x 4′-6″ x 4′-2-3/4″ deep heavy duty FRP vault with white gel-coat interior and brown gel-coat exterior. It is furnished with a fiberglass reinforced plastic lid with a stainless steel piano hinge attachment and lock hardware (LOCK BY INSTALLER). The RDP-250 Series contains an RSPP self-priming display pump with an integral suction strainer, an RCCF-100; 100 sq. ft. cartridge filter unit, an RMS-075-NS 3/4″ fill manifold assembly; 6″ vent connections with a 510 CFM vent fan, and a 3″ floor drain. Additionally, the system includes an RPCP/RLCP U.L. 508 listed control panel in a Nema 4 enclosure with a main disconnect, a pump starter with circuit breaker, contactor & adjustable, solid-state overload, single channel programmable time switch(es) for pump and lights, H.O.A. switch(es), plus lighting contactor(s), G.F.C.I. breaker(s), and water level/low level cutoff control circuit. Unit is pre-wired, pre-plumbed (Schedule 80 PVC) and factory tested, prior to shipment. Please refer to the cut sheet for power requirements, available models, pump curves, additional information. Notes: Cut sheet shows ‘typical’ configuration. Configuration may change due to project requirements. Sump pump available as an option. See RSX-F Series. Custom fabricated per project. Long lead times apply. Options include: Diamond Plate Vault Hatch and Vault Hatch Extension. Documentation & Downloads 7.204 RDP-250 Series Direct Burial Pump Vault Cad File DWG | 4 MB 7.204 RDP-250 Series Direct Burial Pump Vault Cut Sheet PDF | 301 KB
