- Specification
Description Application: By undercoating gun or brush. Areas to be coated should be clean and dry. Any loose flakes of paint, etc. should be removed using a wire brush, etc. coat area with a thick even coat using a spray gun or brush, allow to dry Rubberseal super undercoat may be painted over after minimum of two hours in good drying conditions, leave longer if possible depending on ambient temperature. Clean up brushes and flush spray gun through with thinners or brush wash. Areas not to be coated should be protected by masking of covering.
Specification
| Rubberseal Superundercoat 1 gallon | GM-100 |
|---|---|
| Measuring Range | 1.2 ~ 225.0 mm (Steel) |
| Resolution | 0.1 mm |
| Accuracy | ±(1%H+0.1) mm (H denotes measured thickness of the object) |
| Display | Four-digit LCD display |
| Working Frequency | 5 MHz |
| Sound Velocity | Range: 1000 to 9999 m/s |
| Minimum limit for tube measuring | Ø 20 × 3 mm (Steel) |
| Features | Inverse sound velocity with known thickness |
| Measuring range by known thickness | 1000 to 9999 m/s. (Thickness of the test block must be less than 20 mm to measure speed of sound) |
| Operating Temp. | 0 to 40°C |
| Power Source | 3 × 1.5 V (AAA) |
| Dimensions | 72 × 146 × 29 mm |
| HSN | 90318000 |
| Price |
